We'll be away for a short while. Any orders for bags received between 19 to 26 May will be shipped during the week of 27 May. Thanks for your understanding.

Street Pack

Street Pack

A transformable backpack perfect for your daily urban adventures.

USD $375


The Street Pack is highly versatile backpack for daily carry.

The Street Pack has been designed to provide you with maximum utility in a variety of environments and contexts. It can be worn as a backpack, slung as a satchel, or carried as a tote. It can be stuffed under the seat in front of you on a plane or used as a pillow when you need to sleep on the floor.

The pack follows a conventional silhouette, has no visible branding, and won’t draw attention.

Key Features

The Street Pack follows the design philosophy of the Street Series.

Discreet

Hard wearing

Lightweight

Weather resistant

Extensible

Packable

In addition, the Street Pack is:

Transformable

Storage & Organisation

The Street Pack has a main storage compartment, which is large enough to pack a laptop, camera. and change of clothes.

Inside the main storage compartment, there’s an organisation panel with two large sleeves and two elasticised pockets. These panels are designed for documents, laptops, or tablets. The organisation panel is suspended to prevent your gear hitting the ground when you put down the pack.

There’s a zip pocket on the front of the pack. Inside this pocket is an organisational panel, with a large divider and two smaller elasticised pockets.

On the upper section of the front of the pack, there’s a small zip pocket. This pocket has two zip pullers so the pocket can be accessed when in ‘pack mode’ and in ‘satchel mode’.

On the back of the pack, there’s a zip allowing access into the main compartment. This zip allows access to the main compartment when you’re carrying the pack as a satchel.

On each side of the pack, there are elasticised pockets. These pockets are large enough for a water bottle or compact umbrella.

On the base of the pack, there’s an elasticised pocket, secured by a velcro tab.

Webbing tabs around the pack can be used for compression or to attach other gear. These tabs provide a lot of flexibility for different applications.

Warning: Note that because the Street Pack is packable, the laptop section is not padded. Also note that because the pack is transformable, the top of the sleeve for the laptop section sits below the fold point.

Street Pack Internal Organisation

Internal organisation sleeves and pockets

Carriage

The Street Pack can be carried as a backpack using the supplied quick release shoulder straps. These straps can be fully detached from the pack. The straps have a quick release feature, allowing you to quickly ditch the pack if needed.

The pack straps are compatible with the Travel Pack.

The pack can be carried as a tote, by attaching the supplied 25 mm UHMWPE handles. These handles can be connected at different points to adjust the carry height. The straps use a herringbone weave to ensure a soft feel when carried in the hand. Our straps are designed to be connected to create a longer strap when needed.

The pack can also be carried as a satchel, by attaching a 38 mm shoulder strap (not supplied) to the 38 mm webbing loops on the front and back of the pack. When carried as a satchel, the main compartment can be accessed via the zip. The top compartment can also be accessed. When carried as a satchel, accessory straps can be used to hold the flap down.

Street Pack

Satchel mode A

Street Pack

Satchel mode B

Specifications

Dimensions: 44 cm (17.32 in) tall x 30 cm (11.81 in) wide X 12 cm (4.72 in) deep

Weight: 615 grams (21.69oz), including shoulder straps and handles

Volume: 20 litres (703.90 fluid ounces) for main compartment

Colour: Black

Included accessories

2 x Removeable quick release shoulder straps

2 x Removeable 25 mm UHMWPE handles

Materials

We’ve made no compromises when it comes to materials.

Fabric

Outer fabric: Challenge UltraWeave 400X

Internal lining panels: Challenge EPX70RS

Internal organisation panels: Challenge EPX300RS

Internal and external elasticised pockets: Challenge UltraStretch

Webbing

Attachment points: 25 mm x 1.0 mm UHMWPE mil-spec 17337 weave

Shoulder harness: 25 mm x 1.0 mm UHMWPE mil-spec 17337 weave

Accessory tabs: 25 mm x 0.6mm UHMWPE plain weave webbing

Handles: 25 mm x 1.0 mm UHMWPE herringbone weave

Binding: 0.6 mm UHMWPE webbing

Reinforcement: 38 mm x 0.6 mm UHMWPE webbing

Zips

Main compartment: #8 YKK racquet coil zip with matte PU coating and two black oxide sliders

Front compartment: #5 YKK coil zip with matte PU coating and one locking slider

Rear access: #5 YKK coil zip with matte PU coating and two locking sliders

Components

Shoulder harness components: Acetal

Shoulder harness quick release components: Fidlock

Components are attached to the shoulder strap and handles, not to the bag.

To reduce the risk of accidently jettisoning your pack, the Fidlock components on the shoulder straps can be covered by a simple webbing strap and secured with velcro.


Design & Materials

Learn more about our materials here.

Learn more about our design philosophy here.